Model TXO-234 MKII 2 AND 3 WAY STEREO CROSSOVER INPUT Connectors XLR Type Electronically servo-balanced, RF filtered Impedance Balanced >50k Ohms, unbalanced >25k Ohms Max. Input Level +22dBu typical, balanced or unbalanced CMRR >40dB, typically >55dB at 1 kHz OUTPUT Connectors XLR Type Electronically servo-balanced, RF filtered Impedance Balanced 60 Ohms, unbalanced 30 Ohms Max. Output Level +20dBm, balanced / unbalanced PERFORMANCE Bandwith 20Hz to 20kHz +0 / -0.5dB Frequency Response +5 Hz to -90kHz, +0 / -0.3dB Signal to Noise Ratio Ref.: +4dBu, 20Hz to 20kHz, unweighted Mode Stereo Mode: / Mono Mode: Low Output >93dB / >93dB Low-Mid Output / >94dB Mid Output >95dB High-Mid Output / >94dB High Output >90dB / >88dB Dynamic Range >106dB, unweighted THD & Noise Limiter Off / Limiter On Interchannel Crosstalk 0.5 High to Low: >93dB High to Mid: >94dB Mid to Low: >95dB High to High-Mid: >95dB High-Mid to Low-Mid: >95dB Low-Mid to Low: >92dB CROSSOVER Filter Type Linkwitz-Riley, 24dB/Octave, state variable Stereo Mode Frequencies x1 / x10 Low/High 44 to 930Hz / 440Hz to 9.3kHz Low/Mid 44 to 930Hz / 440Hz to 9.3kHz Mid/High 440Hz to 9.3kHz Mono Mode Frequencies x1 / x10 Low/Low-Mid 44 to 930Hz / 440Hz to 9.3kHz Low-Mid/High-Mid 440Hz to 9.3kHz High-Mid/High 440Hz to 9.3kHz FUNCTION SWITCHES Front Panel Low Cut Activates 25Hz Butterworth, 12dB/Octave high-pass filter Mute Mutes the individual output Phase Invert Inverts the phase at the individual output CD Horn Conects CD horn frequency response above 3.5kHz Limiter Activates the limiter function for all outputs Rear Panel Xover Frequency Multiples crossover frequency range by 10 Mode Selects stereo/mono and 2/3/4-way operation LF Sum Selects normal stereo or mono summed low frequency operation ON=Channel 1 +6dB louder / Channel 2= the same as before CONTROLS Input Controls the input gain (-8 to +12dB) Xover Frequency Controls the crossover frequency